Business, Office & Industrial › Electrical Equipment & Supplies › Other Electrical Equipment & Supplies
1 / 6
Item Specifics
Brand
mix
Type
Mixed Lot
Unit Type
Unit
Country of Origin
United Kingdom
Personalise
No
Description
Items included
Harris wide‑band dual‑trace oscilloscope
Griffin & George signal generator & amplifier
Thandar TG502 5 MHz sweep/function generator
Test Lab frequency counter
Regavolt variable autotransformer (variable mains)
How they work together:
This five‑piece bench test kit gives a complete small‑lab setup for generating, measuring and powering signals — ideal for hobbyists, repair techs or electronics students.
Signal generation:
Use the Thandar TG502 and the Griffin & George unit to produce a wide range of test waveforms (sine, square, sweep, etc.). The Griffin & George amplifier can boost generator outputs when higher drive is needed.
Observation & analysis:
The Harris dual‑trace oscilloscope displays waveforms from the device under test (DUT) in real time, letting you measure amplitude, frequency, phase relationships, rise/fall times and diagnose signal faults. Dual‑trace lets you view input and output or two points simultaneously.
Precise frequency measurement: The Test Lab frequency counter provides accurate readouts of generator or DUT frequencies for verification and calibration tasks.
Controlled mains power: The Regavolt variable autotransformer lets you soft‑start older equipment, apply reduced or slightly varied mains voltage to test voltage‑sensitive behaviour, and protect gear from inrush stress.
Typical workflow buyers will use
Power up instruments (optionally via Regavolt for soft start).
Set the generator (Thandar or Griffin & George) to the required waveform/frequency.
If needed, increase drive with the Griffin & George amplifier.
Connect the oscilloscope probes to the DUT to view waveforms; use dual traces to compare signals.
Confirm frequency with the Test Lab counter and adjust generator or DUT as required.
Vary supply voltage with the Regavolt to check equipment stability under different mains conditions.
Why this bundle is useful
Complete stimulus + measurement + power control in one package.
Great for fault finding, amplifier testing, filter and response measurements, education and lab experiments.
Buyers get flexibility with two generators (one sweep/function), a frequency counter for accuracy, and a variable mains source for safe testing of vintage equipment.
Condition note-
Sold AS‑IS / in good condition but untested
Harris wide‑band dual‑trace oscilloscope
Griffin & George signal generator & amplifier
Thandar TG502 5 MHz sweep/function generator
Test Lab frequency counter
Regavolt variable autotransformer (variable mains)
How they work together:
This five‑piece bench test kit gives a complete small‑lab setup for generating, measuring and powering signals — ideal for hobbyists, repair techs or electronics students.
Signal generation:
Use the Thandar TG502 and the Griffin & George unit to produce a wide range of test waveforms (sine, square, sweep, etc.). The Griffin & George amplifier can boost generator outputs when higher drive is needed.
Observation & analysis:
The Harris dual‑trace oscilloscope displays waveforms from the device under test (DUT) in real time, letting you measure amplitude, frequency, phase relationships, rise/fall times and diagnose signal faults. Dual‑trace lets you view input and output or two points simultaneously.
Precise frequency measurement: The Test Lab frequency counter provides accurate readouts of generator or DUT frequencies for verification and calibration tasks.
Controlled mains power: The Regavolt variable autotransformer lets you soft‑start older equipment, apply reduced or slightly varied mains voltage to test voltage‑sensitive behaviour, and protect gear from inrush stress.
Typical workflow buyers will use
Power up instruments (optionally via Regavolt for soft start).
Set the generator (Thandar or Griffin & George) to the required waveform/frequency.
If needed, increase drive with the Griffin & George amplifier.
Connect the oscilloscope probes to the DUT to view waveforms; use dual traces to compare signals.
Confirm frequency with the Test Lab counter and adjust generator or DUT as required.
Vary supply voltage with the Regavolt to check equipment stability under different mains conditions.
Why this bundle is useful
Complete stimulus + measurement + power control in one package.
Great for fault finding, amplifier testing, filter and response measurements, education and lab experiments.
Buyers get flexibility with two generators (one sweep/function), a frequency counter for accuracy, and a variable mains source for safe testing of vintage equipment.
Condition note-
Sold AS‑IS / in good condition but untested
Inspect & Acquire This Deal
+ Secure this listing directly on eBay UK. Verify closing conditions, packaging formats, and check out safely.